In this section you will find answers to frequently asked questions.
In this section you will find answers to frequently asked questions.
The maximum height of the door can be 3.5 m, while 15 cm of air must always be left between the upper intake grille and the ceiling of the room.
In the case of an air curtain with upper suction, it is always necessary to leave 15 cm of air between the upper part of the blade and the ceiling. Furthermore, between the upper part of the door and the lower part of the barrier there can be a maximum distance of 5 cm.
The main purpose of the electrical heating elements is to adequately heat the air coming out of the barrier, making it pleasant and comfortable for customers to enter the room during the winter. For this reason, a barrier with electrical heating elements should not be considered an instrument with the aim of heating the environment where it is installed.
The distinction is made with reference to the side on which the motor is located. If the door opens from left to right, the installation of a barrier with right-hand motor is recommended. Conversely if the door opens from right to left, the advice is to install a left barrier.
No, our barrier models can only be installed horizontally.
AirJet is the only air curtain model that can be controlled via an offline web page (not available on the App Store / Play Store) that can be managed on site and not remotely. Its function is to replace the mobile device with the remote control.
The automatic start kit is an accessory that has the purpose of managing the on/off of the barrier automatically, when the room door is opened or closed. The kit can be used in the following models: AirJet, Aria 3 Silence (with heating element), Aria 3 Silence Front, Aria 2 Elegance T, Aria 2 Elegance TR, Aria 2 Elegance CR and Air For 3 CR.
Selection of the correct item refers to the capacity in l/h, to the kW of the air conditioner and above all to the vertical delivery (head) from the split to the condensate drain.
The Excellens channel is specifically designed for installations on irregular surfaces. In fact it has a rounded base which makes imperfections almost imperceptible.
Instead, the Optima line has a flat base and is therefore recommended for installations on perfectly smooth surfaces.
The heating cable is the ideal solution to solve the problem of freezing condensate water. It features an automatic thermostat which is activated at a temperature of +3°C and switches off at +12°C.
Spirit is the bracket specially designed for installations in environments with a high degree of salinity and saltiness: in fact, it is made of PA6 (glass-filled nylon) and has the characteristic of resisting ageing and atmospheric agents.
The colour of the no-shock vibration dampers refers to the hardness of the material. The two lighter coloured ones (SOFT) are to be applied on the fan side of your outdoor unit, while the two darker ones (HARD) are to be installed on the compressor side.
The Pico cannot be considered a bathroom extractor as for this environment it is necessary to extract moisture and any odours in a short space of time. Furthermore, having a ceramic material exchange pack, the humidity could not guarantee the correct heat recovery. With reference to bathrooms, Tecnosystemi offers a wide range of extractors (see Apply.co catalogue).
The vibration damper has the function of isolating the wall bracket from the machine thus avoiding any electrical discharge.
This accessory has been specially designed with a particular rounded shape to allow the refrigerant pipes a wide curvature which prevents them from being crushed and at the same time prevents the insulation from tearing.